(2) Rollers, made of carbon steel hanger and nylon wheel with ball bearing makes your door moving stably and in low noise. (2) Door Stops, used to adjust and control the rolling distance. (1) Floor Guide, to prevent door from shifting, door bottom groove is required.
(2) Anti-jump discs prevent hanger wheels from jumping off the track. (1) Hex tools and all hardware fasteners. The length of rail should be at least twice of width of door panel.
The recommended space between door top and roller top is 5-1/8 inch, Please leave enough space from your ceiling. In case of directly mounting on wall, the final gap between door and wall is about (1/4" to 13/16") which depends on door thickness.
Only the hardware is for sale. Rail can be cut to any length. Before install, Measure your door height, door trim(if available) and bottom groove, Leave appropriate gap for your floor guide. This kit is probably Not for door trim or door casing, otherwise you may need a header(a solid wood board) for enough clearance. Door weight capacity: 270 lb, for door opening up to 36", door thick 1 3/8" and up.The track kit comes with 2 kinds of wall fastener, 1 for 16 wall stud, 1 for Concrete Wall. Very detailed instruction explains every step with words and pictures. All nylon wheels have been tested beyond 100,000 rolls. The item "JUBEST 6.6ft 1 Rail Satin Nickel Steel Sliding Barn Door Hardware Flat Track Kit" is in sale since Wednesday, March 18, 2020. This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware". The seller is "bashmentstyle" and is located in Fort Worth, Texas. This item can be shipped to United States.