(1) Floor Guide, to prevent door from shifting, door bottom groove is required. (2) Anti-jump discs prevent hanger wheels from jumping off the track. (1) Hex tools and all hardware fasteners.
All parts tested with salt water spray. The length of rail should be at least twice of width of door panel. The recommended space between door top and roller top is 4-5/8 inch, Please leave enough space from your ceiling. The recommended gap between door and wall is about (1/4" to 3/4")which depends on door thickness. Only the hardware is for sale.
Rail can be cut to any length. Before install, Measure your door height, door trim(if available) and bottom groove, Leave appropriate gap for your floor guide. This kit is probably Not for door trim or door casing, otherwise you may need a header(a solid wood board) for enough clearance.Your advice is welcome at any time. The item "6.6ft 1 Rail Satin Nickel Steel Hanger Roller Sliding Barn Door Flat Track Kit" is in sale since Wednesday, March 28, 2018. This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware". The seller is "barndoorfactorydirect" and is located in Plainfield, Indiana. This item can be shipped to United States.